WF-LB-T01 · PRELIMINARY · TECHNICAL 3D · NOT PHOTOREALISTIC
Stabilising T Module
| Component ID | WF-LB-T01 |
| Family | LOWER PROTECTIVE BELT |
| Revision | R0.1 |
| Priority | P0 |
| Engineering status | PRELIMINARY |
| 3D model level | PARAMETRIC |
| Nominal L × W × H | 2 × 1.65 × 3.65 m |
| Material | Precast RC C35/45 |
| Unit mass (catalog) | TBC |
| Transport mass (live) | 7.86 t |
| Installed mass (live) | 7.86 t |
| Mass basis | CALCULATED precast RC 2.45 t/m³ from parametric section |
| BOM unit | pc |
| 3D asset | GLB · parametric · tmodule · origin base-centre · m |
| volume m3 | 3.209 |
Interfaces / snap points
LEFT_LB · LB_ENDRIGHT_LB · LB_ENDTOP_BEAM · BEAM_SEATFOUNDATION · BASE
Compatibility
WF-LB-L01WF-LF-800WF-LF-1000WF-LF-TOP01
Simulation states
NORMALLOADEDDEFORMEDDAMAGEDINSPECTION REQUIREDREPLACEMENT REQUIREDISOLATEDREMOVED
Upper geometry identical to L module. Only lower base and haunch mirrored to create T footprint. Base width 1.65 m = PRELIMINARY BASELINE / TBC.